机房工作需要有良好的体魄啊
[
调一条光路，站了一上午，成战神了，下午受不了了，搬了个凳子到机房里面坐起，又成坐神了，只是辐射和噪音都太大，，对身体无益啊。
另外，经常把笔记本放在膝盖上坐着上网对男人不好哟，
29
十
07
28
十
07
梅兰日兰 L86系列
[
卫生间风暖开关孔够大不？装的下风暖的那个大开关不？
档次
较高：
TCL超音速、西蒙60、奇胜E3000、梅兰日兰L86、罗格朗（美特、马赛都偏贵的）
这些产品配两室两厅一般花费在1600~2500，外观整体漂亮，比较有档次。如果真的喜欢，多花1000元个人感觉还是很值的。
普通：
TCL银韵、K系列；西蒙50、58、59；奇胜1000、2000；梅兰U86；松下宏彩、佳典纯；朗能各系列；天基各系列；西门子灵动、远景等。
装两室两厅一般在600~1000元，品牌、外观选择也比较多。这个档次产品总体质量比较好，有些品牌的产品还达到国际标准的（比如梅兰、西蒙）。为了用得放心，外观喜欢，买这个档次产品多花200~300肯定值得。
从这上面看来说，MGE的U86可以作为低价选择系列，L86系列可以作为客厅高端选择
最佳外型设计（不分排名）：西门子灵动、西蒙60、西蒙59、梅兰日兰L86、奇胜E3000
较好外型设计（不分排名）：西蒙50、TCL银韵、TCL-K系列、梅兰日兰U86、松下佳典纯
从这里来说，L86系列的的外观无疑是最高端的，
需要带有开关的插座：客厅空调插座（16A）、主卧空调插座（16A）、次卧空调插座（16A）、洗衣机插座、厨房微波炉插座（16A），总共5个
卫生间、厨房的开关都需要防水盖不？
1、目前主要销售的开关分两种，即单极开关和双路开关。单极就是普通开关，一个开关闭合点，闭合点接触，电路通，分开电路断。双路就是有两个闭合点，开关在两条线路中间进行择一接触。双路开关主要用于双控用途。比如在厅门口装一个，在卧室门外装一个，都可以用来控制厅里面的主灯。这也就回答了你的另一个问题，双控不用单极开关，而要用双路的。
以上说明，需要双控的地方一定要买双路开关，咱们家有几个双控？
客厅-门厅
主卧床-主卧门
次卧床-次卧门
一共是6个？
25
十
07
支持珊瑚虫
[如果你是个有良知的人，如果你是珊瑚虫用户，请为我们声援珊瑚虫投上你的一票！一个人的力量微弱，大家合作的力量才是无穷无尽的！我们希望喜欢珊瑚虫的你站在我们这里一起为声援力挺珊瑚虫共同努力！声援珊瑚虫交流平台： http://www.helpsoff.com.cn，谢绝发表过激言论哦！
23
十
07
贴砖，很好
[
开始勾缝了，厨房的墙砖很pp，突突的，因为尺寸的原因，补了28+3块砖，卫生间，
谢天谢地不用拆厨房的砖，卫生间今天已经贴了一半的墙了，正面的墙面水泥已经干了，只有在这些干了的水泥上继续贴转。实际上，卫生间纵深变少了。我早就说过此消彼会长，恩
心里普通扑通，不知道进厨房右边那里会不会有问题，空间想象能力很差，
21
十
07
美观还是实用-请不要冲动
[
美观还是实用？记得装修之初给家里的定位就是实用第一，所有有了很多处的双控和很多很多的开关和插座，几乎把所有能想到的位置都考虑到了，不过肯定在将来的生活中还会发现很多没考虑周全的，但是起码，我们尽力了。
双控开始只弄了一个主卧的，后来lp的强烈要求下增加了次卧和客厅门厅的双控，另外修改了次卧的床头开关位置，一切为了实用，兼顾美观。
卫生间吊顶原来可以不止210cm，可以到220cm左右，并且由于开发商原因，卫生间顶部管道的最低点已经低于卫生间门的上沿，这导致门需要重新做，damn量尺寸那天我在干啥，，全部墙砖需要全部拆掉重新贴，说真的，这真是个让人垂头丧气的消息，
19
十
07
批量修改字段记录
[
update eqdkp_auth_users set auth_setting =’Y’ where user_id = 3 ;
将eqdkp_auth_users表中凡是user_id = 3的auth_setting 字段记录修改成Y
19
十
07
受不了了，必须用ntop了
[
wget http://nchc.dl.sourceforge.net/sourceforge/ntop/ntop-3.3.tar.gz
现在版本的ntop需要先用./autogen.sh 检查文件需求，，如果不满足，会给你个提示，类似
[root@scuadsl ntop-3.3]# ./autogen.sh
Starting ntop automatic configuration system v.0.2.3
Please be patient, there is a lot to do…
1. Testing gnu tools….
You must have libtool installed to compile ntop.
Download the appropriate package for your distribution, or get the
source tarball from ftp://ftp.gnu.org/pub/gnu/libtool
We require version 1.4 or higher
We recommend version 1.5 or higher
咱是centos直接yum install libtool就好了
[root@scuadsl ntop-3.3]# ./autogen.sh
Starting ntop automatic configuration system v.0.2.3
Please be patient, there is a lot to do…
1. Testing gnu tools….
libtool ….. 1.5.6
…. ok
automake …. 1.9.2
…. ok
autoconf …. 2.59
…. ok
2. Preparing for libtool ….
You should update your `aclocal.m4′ by running aclocal.
…. done
3. Create acinclude.m4, local definitions for automake …
…. done
4. Running aclocal to create aclocal.m4 …
…. done
5. Running autoheader to create config.h.in …
…. done
6. Running automake to create Makefile.in …
…. done
7. Running autoconf to create configure …
…. done
8. Running ./configure …
I am going to run ./configure with no arguments
if you wish to pass any to it, please specify them on the ./autogen.sh command line.
Welcome to ntop, Version 3.3
copyright (c) 1998-2007 Luca Deri <deri@ntop.org>
Configuration script version v3.3-09-06-2007
************************************************************************
* *
* NOTICE: I know you’re used to ignoring output from ./configure *
* *
* ntop has a lot of complexity and interdependences. *
* *
* Please, please AT LEAST read the stuff in these boxes! *
* *
*>>> The ACTION taken by ./configure is shown prefixed with ‘>>>’ *
* *
* If that ACTION is unacceptable, *
*??? Steps to take to fix the problem are shown, prefixed with ‘???’ *
* *
************************************************************************
NOTE:
To enable additional, debugging messages during the ./configure
execution, do this before running ./configure:
$ export NTOPCONFIGDEBUG=yes
Configuring ntop according to your request(s):
./configure
checking build system type… i686-redhat-linux-gnu
checking host system type… i686-redhat-linux-gnu
checking target system type… i686-redhat-linux-gnu
checking for a BSD-compatible install… /usr/bin/install -c
checking whether build environment is sane… yes
checking for gawk… gawk
checking whether make sets $(MAKE)… yes
checking for style of include used by make… GNU
checking for gcc… gcc
checking for C compiler default output file name… a.out
checking whether the C compiler works… yes
checking whether we are cross compiling… no
checking for suffix of executables…
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ANSI C… none needed
checking dependency style of gcc… gcc3
checking how to run the C preprocessor… gcc -E
checking for gcc… (cached) gcc
checking whether we are using the GNU C compiler… (cached) yes
checking whether gcc accepts -g… (cached) yes
checking for gcc option to accept ANSI C… (cached) none needed
checking dependency style of gcc… (cached) gcc3
checking for a BSD-compatible install… /usr/bin/install -c
checking whether ln -s works… yes
checking whether make sets $(MAKE)… (cached) yes
checking for a sed that does not truncate output… /bin/sed
checking for egrep… grep -E
checking for ld used by gcc… /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld… yes
checking for /usr/bin/ld option to reload object files… -r
checking for BSD-compatible nm… /usr/bin/nm -B
checking how to recognise dependent libraries… pass_all
checking for ANSI C header files… yes
checking for sys/types.h… yes
checking for sys/stat.h… yes
checking for stdlib.h… yes
checking for string.h… yes
checking for memory.h… yes
checking for strings.h… yes
checking for inttypes.h… yes
checking for stdint.h… yes
checking for unistd.h… yes
checking dlfcn.h usability… yes
checking dlfcn.h presence… yes
checking for dlfcn.h… yes
checking for g++… g++
checking whether we are using the GNU C++ compiler… yes
checking whether g++ accepts -g… yes
checking dependency style of g++… gcc3
checking how to run the C++ preprocessor… g++ -E
checking for g77… g77
checking whether we are using the GNU Fortran 77 compiler… yes
checking whether g77 accepts -g… yes
checking the maximum length of command line arguments… 32768
checking command to parse /usr/bin/nm -B output from gcc object… ok
checking for objdir… .libs
checking for ar… ar
checking for ranlib… ranlib
checking for strip… strip
checking if gcc static flag works… yes
checking if gcc supports -fno-rtti -fno-exceptions… no
checking for gcc option to produce PIC… -fPIC
checking if gcc PIC flag -fPIC works… yes
checking if gcc supports -c -o file.o… yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries… yes
checking how to hardcode library paths into programs… immediate
checking whether stripping libraries is possible… yes
checking dynamic linker characteristics… GNU/Linux ld.so
checking if libtool supports shared libraries… yes
checking whether to build shared libraries… yes
checking whether to build static libraries… yes
configure: creating libtool
appending configuration tag “CXX” to libtool
checking for ld used by g++… /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld… yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries… yes
checking for g++ option to produce PIC… -fPIC
checking if g++ PIC flag -fPIC works… yes
checking if g++ supports -c -o file.o… yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries… yes
checking how to hardcode library paths into programs… immediate
checking whether stripping libraries is possible… yes
checking dynamic linker characteristics… GNU/Linux ld.so
appending configuration tag “F77″ to libtool
checking if libtool supports shared libraries… yes
checking whether to build shared libraries… yes
checking whether to build static libraries… yes
checking for g77 option to produce PIC… -fPIC
checking if g77 PIC flag -fPIC works… yes
checking if g77 supports -c -o file.o… yes
checking whether the g77 linker (/usr/bin/ld) supports shared libraries… yes
checking how to hardcode library paths into programs… immediate
checking whether stripping libraries is possible… yes
checking dynamic linker characteristics… GNU/Linux ld.so
checking for aclocal.m4… yes
checking for depcomp… yes
checking for library containing gethostbyname… none required
checking for library containing socket… none required
Checking C compiler program and features…
checking for gcc… (cached) gcc
checking whether we are using the GNU C compiler… (cached) yes
checking whether gcc accepts -g… (cached) yes
checking for gcc option to accept ANSI C… (cached) none needed
checking dependency style of gcc… (cached) gcc3
*******************************************************************
*
* Checking for unique options for i686-redhat-linux-gnu, gcc…
*
* This appears to be LINUX Centos 4.3
*
* Testing for extra configuration options for LINUX Centos 4.3
*
*******************************************************************
Test the compiler and setup CFLAGS…
checking if compiler accepts -W (warning flags)… yes
Critical library/include tests…
found in standard installation
checking for pcap_next_ex in -lpcap… yes
checking for gdbm…
checking gdbm.h usability… no
checking gdbm.h presence… no
checking for gdbm.h… no
checking for gdbm_open in -lgdbm… no
*******************************************************************
*
* ERROR: gdbm header or library routines are missing
* (yes means it was found, no means it was not found)
*
* gdbm.h…no
* gdbm_open() in -lgdbm…no
*
*>>> No way to proceed.
*
*??? 1. Install libgdbm
*??? and Rerun ./configure
*??? or 2. Use the –with-gdbm-xxxxx= options
*
*******************************************************************
configure: error: Unable to continue… aborting ./configure
一大堆，挑重要的看把，大概就是说你没gdbm，去yum好了，不过这东西直接configure了，烦
yum install gdbm*
完了之后自己看confiure -h 挑参数加上
Optional Features:
–disable-FEATURE do not include FEATURE (same as –enable-FEATURE=no)
–enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+–ntop:———————————————————————+
–enable-iknowbetter Override WILLFAIL
–enable-mysql Enable usage of mysql [default=enabled]
+—————————————————————————-+
–disable-dependency-tracking speeds up one-time build
–enable-dependency-tracking do not reject slow dependency extractors
–enable-shared[=PKGS]
build shared libraries [default=yes]
–enable-static[=PKGS]
build static libraries [default=yes]
–enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
–disable-libtool-lock avoid locking (might break parallel builds)
+–ntop-specific:————————————————————+
–enable-sslv3 enable ssl v3 support [default=disabled]
–enable-sslwatchdog enable Watchdog for ssl hangups [default=disabled]
–disable-plugins disable compilation of plugins [default=enabled]
–enable-ignoresigpipe Ignore SIGPIPE errors [default=do not ignore]
–disable-snmp Disable SNMP support [default=disable]
–enable-i18n Enable (limited) internationalization [default=disabled]
–enable-jumbo-frames Enable Jumbo (9K) Ethernet frames [default=disabled]
–disable-ipv6 use IPv6 [default=enabled]
Optional Packages:
–with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
–without-PACKAGE do not use PACKAGE (same as –with-PACKAGE=no)
–with-gnu-ld assume the C compiler uses GNU ld [default=no]
–with-pic try to use only PIC/non-PIC objects [default=use
both]
–with-tags[=TAGS]
include additional configurations [automatic]
+–external-packages:——————————————————–+
–without-ssl disable HTPPS support [default=enabled]
–with-tcpwrap enable use of TCP Wrapper [default=disabled]
+-External-source-locations:————————————————-+
–with-rrd-home=DIR Usually /usr/local/rrdtool-1.2.x
–with-pcap-root=DIR LBNL pcap located in DIR
–with-gdbm-root=DIR gdbm located in DIR
–with-gdbm-lib=DIR or libgdbm located in DIR
–with-gdbm-include=DIR or gdbm.h located in DIR
–with-zlib-root=DIR zlib located in DIR
–with-zlib-lib=DIR or libz located in DIR
–with-zlib-include=DIR or zlib.h located in DIR
–with-ossl-root=DIR openSSL located in DIR
–with-ossl-lib=DIR or libssl located in DIR
–with-ossl-include=DIR or ssl.h located in DIR
–with-localedir=DIR LOCALE files located in DIR (i18n)
–with-memorydebug=VALUE Set numeric code for memory debug option
看来看去还是没啥设置的，
./configure –prefix=/usr/local/ntop
结果，，
configure: error: Unable to find RRD at /usr/local/rrdtool: please use –with-rrd-home=DIR
，，提示没rrd
到http://dag.wieers.com/rpm/packages/rrdtool/，去找合适自己的rpm下载把，tarball麻烦，
-rw-r–r– 1 root root 49869 Jun 7 06:47 perl-rrdtool-1.2.23-1.el4.rf.i386.rpm
-rw-r–r– 1 root root 938939 Jun 7 06:47 rrdtool-1.2.23-1.el4.rf.i386.rpm
-rw-r–r– 1 root root 5177 Jun 7 06:47 rrdtool-devel-1.2.23-1.el4.rf.i386.rpm
下回来装起，先nodeps 装perl 那个，然后装后面的
nnd，这东西编译起来废话很多，最后提示你可以gmake或者make了那你就make把
18
十
07
前锋啊前锋，让我拿什么来爱你
[
租房子的的破烟道热水器不好用了 很久了，换了前锋的还是烟道的热水器，开始还好用，到冬天了，每次啪啪的打火都打的人心惊胆战，开水之后过了3，4秒都打不着火，煤气哗哗的冒，根本就不敢继续放热水。
被逼无奈非要用热水，那个架势啊，开了水就跑进屋，5秒以后砰的一声，火打着了，窗户玻璃都被震的哗啦响，新居怎么敢用前锋哟。本来装修之前都想好了定前锋的12l的，这么一来，打死也不用前锋了，林内不错 呢
15
十
07
又到公积金收获时
[
说到公积金，今年的公积金办理真是坎坷不断啊，
9月13号就去公司拿了单子，签字，盖章，公积金中心审核，回来开支票，然后lp拿去建行下帐，结果由于期间忙了，加上没看到转账支票上的日期，去办的时候已经过了10天的期限了，于是，只有国庆之后再办了
10月12号弄到公司的新支票，去公积金中心，哪想到…………公积金中心新系统上线，9月15号之前办理的全部需要重新拿单子从头办理，并且每天限办600名，于是只有回来，把所有准备工作做好，周一我自己跑。
周一一大早，冲到中行把存折打了，冲到公司，用新表办完了所有手续，我是新系统上线之后第一个办理的，哎哟，总算弄了个第一，然后直接到公积金中心排号，俄di神啊，整个中心全是人，我冲到排号机那里抢了个号，一看，399号（上午只办理400个），这要等到啥时候。。不过运气还好，总算拿到号了，坐下来拿出本本想找无线，未遂，突然想起公积金中心有个同学嘛，打个电话试试运气，hoho，运气不错直接去她办公室坐坐喝水看报纸。
本来没想插队的，她们一个办公室的一个胖哥说，那个谁谁，你直接带你同学去找xx办了赛，于是，生平第一次插队办了公积金，办完了之后排号机那里已经排成长队了，大家都在排下午的号，跑到最后一个人那里，把我的号给了个大姐，我当时想的是，“拍最后也有好运气”，大姐感谢的话说了又说，下了楼，明天才能去银行下帐，赶紧跑回公司，我这国庆已经相当于放了21天了，不能再放了，，，要努力工作了
12
十
07
去掉了左边jiwai的flash，回复终于好了
[回复终于正常了